2100 TO 17000 WATTS

harsh environment outdoor applicationS On-line or fast transfer inverter

LED, HID, Incandescent, Fluorescent

Installed in Parking Garages, Bridges, Toll Booths, Tunnels, Sports Stadiums, Railroads Prisons, Roof Tops, Extremely hot or cold areas, Homeland Security

Harsh Environment UPS


Listed to UL 924 by ETL
Online or Fast Transfer (under 2ms)
Electronics maintain normal output when tested to 136F and -29F temperatures
Heavy duty NEMA 3R enclosure in steel, aluminum, or stainless steel
Double Conversion, "no-break" online system for all applications and lamp types
Automatic monthly and annual self testing
Latest technology microprocessor controlled electronics with PWM design for true sinewave output.
Designed for remote locations where input voltage can switch from +20% to -35%



Nominal Input Voltage: 120, or 208, or 240, 277 or 480 VAC single phase
Input Voltage Range: +20% to -35%
Input Frequency: 60 Hz ±5%
Power Factor: Unity 1.0
Overcurrent Protection: Circuit breaker
Power Connection: Hard wired (terminal block)
Input Configuration: 2 wire (hot, neutral) plus ground
Output Rating: 2.1, 3, 5, 6, 8, 10, 12.5, 14, 15 and 17 kW (Normal Mode/Emergency Mode)
Voltage: 120/240, 208, 277, 480 VAC, Single Phase;
Voltage Regulation: ±3% No Load to Full Load; ±3% High Line to Low Line
Frequency: 60 Hz ±0.25 Hz (When on Inverter)
Waveshape: Sine Wave
Harmonic Distortion: <7% THD; <5% Single Harmonic
Crest Factor: Up to 3 to 1
Power Factor: unity to 17kW
Overload: 125% for Ten (10) Minutes; 150% Surge
Noise Rejection: -120 dB Common Mode; -60 dB Normal Mode
Operating Temp: Tested for -29°F(-34°C) to 136°F(58°C)
Accessibility: All Servicing is through the Front
Cable Entry: Bottom
Mounting: Four (4) Mounting Holes Provided to Anchor Enclosure to Pedestal
Battery Specification
Battery Run Time: 90 min
Battery Type: Sealed, Maintenance-Free, Lead calcium
Nominal DC Link: 48 or 120 VDC link
Overcurrent Protection: Circuit Breaker



PDF format
Word Format