2.1 kW TO 17 kw

DOUBLE CONVERSION, FAST TRANSFER OR STAND BY SYSTEMS AVAILABLE TO POWER ALL LAMP TYPES INCLUDING LED and HID

LED, HID, Incandescent, Fluorescent

Installed in Office Buildings, Factories, Hospitals, School, Shopping Centers, Casinos, Airports, Train and Bus Terminals

WAVE RIDER 1

FEATURES

CSA Listed to UL924 & UL1778
Compact, each units in one cabinet
LED, Incandescent, Fluorescent, HID, HPS
Power Factor & Energy Efficient Ballast
92 - 98% Efficiency
Sinusoidal wave
Pulse width modulated (PWM)
Generator compatible
Multiple Output Voltages
LCD panel for monitoring of continuous self diagnostic
Modular Assembly for Ease of Installation
Transformerless Technology
Battery exerciser
Double Conversion Technology or Fast Transfer
Seismic rated with bracket kit.
Stackable Cabinets
RS 232 & RS 485
Global Monitoring System Option

 

SPECIFICATIONS

Power Rating 2.1, 3, 5, 6, 8, 10, 12.5, 14, 15 and 17 kW
Input Voltage 2.1 - 6, & 8KW: 120, 208, 240, 277 or 480 VAC (-20% to +15%)
7.5, 10 to 17 kW: 208, 240, 277 or 480 VAC (-15% to +15%)
Output Voltage 120, 208, 240, 277, AND 480 VAC
Output Frequency Inverter Operation: : 60Hz ±0.5Hz
Output Voltage Reg. ±3% Regulated within CBEMA curve
Output Waveform Sine-wave
Input Protection Optional Input circuit breaker provided protection to the unit, load and personnel. Input Circuit Breaker may be higher interruption rated up to 65 KAIC.
Output Protection Internal Electronic overload protection. Circuit breaker provides inherent overload protection. Factory selectable voltage 120, 208, 240, 277 or 480 for input or output voltages. If input is different from output or output different from input, an internally mounted transformer is required.
Surge Protection The inverter will protect itself and the load against surge as defined in ANSI/IEEE C62.45 category A and B.
Power Factor 1.0
Isolation Output is completely isolated from input, and with multi voltages, when input & output is different.
Noise Isolation -120 dB. Common-Mode.; 60 dB. Transverse-Mode
Efficiency 98%, 92% minimum
Crest Factor 3.1 Typical (may vary by model)
Battery Sealed maintenance free
Battery Management System Utilizes a microprocessor technology to monitor the batteries critical levels and apply charging cycles in a method to substantially increase battery life
Battery Housing Free standing NEMA 1 enclosure powder coated paint Front access only Multiple conduit entries Refer to chart for dimensions
Recharge Time Approx. 16 times discharge rate
Environmental

Humidity: 0-95% RH w/no condensation
Operating Temperature:
UPS: 0°C to 40°C. (32°F to 104°F)
Battery: 20°C to 30°C. (68°F to 86°F)
Storage temperature: -20°C to 60°C. (-40°F to 140°F)

Safety Agencies CSA Listed to UL924, UL924A, & UL1778, NFPA, NEC, OSHA.
Dimension 2.1 - 3 kW: 39" Wide x 48" High x 18" Deep
6 - 8 kW: 39" Wide x 68" High x 18" Deep
10 - 17 kW: 51" Wide x 70" High x 30.5" Deep

 

Download
Documents

PDF format
Word Format